New Motorized Pan & Tilt Head with optional add-ons FocusPLUS PRO and Vision Module. Wireless & seamless compatibility within the entire edelkrone ecosystem.
Smart stationary object tracking
Advanced focus control with FocusPLUS PRO
Face Tracking with Vision Module (Coming Soon)
App / Controller / Hand-Control
Wireless edelkrone ecosystem integration
Fast & Simple Programming
Time-Lapse 2.0
Precise Repeatable Motion
Zero Noise & Backlash-Free
Exclusive edelkrone features
Automatic Target Tracking & Live Target Switching
HeadPLUS v2 has the ability to learn three different stationary targets. When transitioning between targets, HeadPLUS v2 keeps each target in frame and in focus even when operating on SliderPLUS, SliderONE, JibONE, and DollyONE and DollyPLUS.
You can make a live, smooth transition among any of the three preset targets by selecting your desired target through the App.
Sequencer Feature
With Sequencer feature, you can chain multiple poses one after another to create complex camera motion. Transition speed between each pose is independently adjustable. You can also make the system loop back and forth in any given order.
Can be Hand-controlled
Instead of relying on a remote control, manually adjust the pan & tilt angle of HeadPLUS v2 and program your camera motion with just your hands! This gives an unprecedented speed to your workflow and makes the entire process much more intuitive.
2 models based on carrying capacity
Must have HeadPLUS add-ons
Add New FocusPLUS PRO for automated focus control
FocusPLUS PRO is a motorized focus controller. When used with HeadPLUS v2 on any edelkrone slider, dolly or jib, FocusPLUS PRO delivers an auto-focus feature as the camera moves closer to or further away from your locked targets. FocusPLUS PRO also works in keypose mode where you can assign different focus adjustments on individual keypose buttons and recall them when needed.
* FocusPLUS PRO is also compatible with previous generation HeadPLUS (v1).
LEARN MORE
Add Laser Module to speed up target learning
to speed up target learning
* Laser Module is also compatible with previous generation HeadPLUS (v1).
LEARN MORE
Add Vision Module for automatic face tracking
(Coming Soon)
Vision Module, designed exclusively to attach on HeadPLUS v2 or HeadPLUS v2 PRO, will lock on your target's face and automate face tracking with live camera feed on edelkrone App. Vision Module is the ultimate add-on to complete any edelkrone ecosystem motion control setup that includes HeadPLUS v2 or HeadPLUS v2 PRO. Vision Module is coming soon!
* FocusPLUS PRO is also compatible with previous generation HeadPLUS (v1).
LEARN MORE
Connects wirelessly to edelkrone Sliders, Jibs & Dollies
When HeadPLUS v2 is combined with a slider, jib or dolly, you can easily program 3-, or 4-axis camera motions. You can record never-before-seen, amazing motion time-lapses and visual effects shots with any combination you choose. The devices pair instantly in the background while using the same App or Controller to control all devices together.
Sliders
Motorized sliders with their unique design approach and portability : SliderPLUS and SliderONE
Jibs
Motorized jibs that do it all and capture vertical, horizontal and diagonal camera motion in seconds : JibONE
Dollies
Motorized rail-less dollies to create linear or curved camera motions : DollyONE and DollyPLUS
Super easy time-lapse programming
Setting up a motion time-lapse is the easiest with edelkrone App. In your time-lapse videos, you can have a simple transition between two keyposes or you can convert a recorded complex camera motion into a time-lapse with a single button. You can use edelkrone’s unique Dynamic Interval and Dynamic Step Size Technologies to introduce never-before-seen effects to your time-lapses which bend the speed of time and speed of camera motion independently of each other.
Single App to control all
edelkrone App cleverly scans the available devices in its surroundings and pairs with them automatically, giving you a single screen to control all devices together.
The interface is extremely simple.
Use the controls on the top part of the App screen to set the pose of your camera. Press and hold on any of the keypose buttons to record that pose. Use the same button to recall that pose. It’s that simple. Press 2 keyposes to put the system in loop between both keyposes.
You can adjust the speed and acceleration of the transition between keyposes. Or, you can easily create time-lapse videos by using the same keyposes.
App Details.pdf
edelkrone Controller
If you prefer not to use your phone (edelkrone App), and need a dedicated solution, edelkrone Controller will be your best friend. Compatible with all motorized edelkrone sliders, jibs, heads and dollies, edelkrone Controller allows you to easily control any combination of these devices.
Perfect on the inside
Super Accurate Backlash-free Gear Design
All edelkrone motorized products use the same backlash-free gear design technology for perfectly repeatable, smooth motion for even the most demanding shots. Even the most portable edelkrone devices have heavy-duty gears assuring lifetime good performance.
Ultra Quiet Step Motor Driving Technology
All edelkrone motorized devices have a unique quiet step motor driving technology that combines ultra precise step motor positioning ability with ultra quiet operation. Step motors are perfect for precise motion control but until now their downside has been the noise they make. With edelkrone motorized devices, you will get the world’s most precise positioning with the quietest performance.
edelkrone Motion Control System Introduction Video
This video introduces the devices in our motion control ecosystem and describes the commonly-shared key features of these devices.
After watching this video, you will discover the unique features that give amazing powers to creators and see why edelkrone is one of the leaders in the motion control industry.
Features
- 14.3 x 3.93 x 2.79 in (364 x 100 x 71 mm) actual size
- 6.17 lb (2.8 kg) (including the L-Bracket and recommended batteries) L Bracket: 0.93 lb (423 gr)
- Motorized Pan & Tilt Head for Cameras 10 lb (4.5 kg) or less
- Can be controlled via edelkrone App & edelkrone Controller
- Can be easily programmed for motion time-lapses
- Can pair and work with SliderONE v2, Slide Module v2, Slide Module v3, SliderPLUS, SliderPLUS PRO, DollyONE, DollyPLUS, FocusPLUS PRO, Laser Module and previous generation SliderPLUS, SliderPLUS PRO.
- Can automatically track stationary objects.
- Can track focus on stationary objects (Add FocusPLUS PRO)
- Can not pair with Focus Module* (*Previous generation Focus Module)
- Can learn target positions automatically (Add Laser Module)
- Can be powered via Gold Mount / V-Mount / LP-E6 or NP-F batteries
- Can also be powered via AC-DC adapter
- Ultra quiet operation
- Ultra precise backlash-free operation
- Allows manual panning and tilting without affecting the motors.
- Unfolds to fit in a back-pack.
- Pan & Tilt locks to safely relocate.
- Power On/Off switch and instant feedback screen
- 100% CNC machined aluminum body
- Battery Brackets not included (sold separately)
기술 사양
|
Box Contents |
HeadPLUS v2, L Bracket for cameras up to 10 lb (4.5 kg), width extenders for SliderPLUS legs, allen keys |
|
|
Size |
HeadPLUS v2 : (L x W x H) 14.3 x 3.93 x 2.79 in (364 x 100 x 71 mm) L Bracket (folded): (L x W x H) 6.7 x 5.6 x 2.9 in (168.5 x 140 x 75 mm) |
|
|
Weight |
HeadPLUS v2: 6.17 lb (2.8 kg) (including the L-Bracket and recommended batteries) L Bracket: 0.93 lb (423 gr) |
|
|
Recommended Camera Load |
Recommended Camera Load |
|
|
Mounting options |
Mounting options |
|
|
Min. step size |
0.022 degree |
|
|
Max. speeds |
360° in 20 sec |
|
|
Number of axes |
2 (Pan & Tilt) |
|
|
2 (Pan & Tilt) |
x2 ultra precise step motors with ultra high-res encoders. |
|
|
Battery life |
28.8 Wh energy: Operates for 5 hours (continuously at full speed), Shoots 36,000 photographs (in Time-Lapse Mode)
x1 Canon LP-E6 battery is 14.4 Wh
x1 Sony NP-F970 battery is 47.4 Wh |
|
|
Power input |
V-Mount type battery, Gold Mount type battery, LP-E6 battery, NP-F battery, AC/DC adapter (9.0V, 2A) (NOT included) |
|
|
Shutter trigger cable socket |
2.5 mm (shutter trigger cable sold separately) |
|
|
Can be paired with |
SliderONE v2, Slide Module v3, SliderPLUS v5, SliderPLUS v5 PRO, DollyONE, DollyPLUS, FocusPLUS PRO, Laser Module, and previous generation Slide Module v2, SliderPLUS, SliderPLUS PRO |
|
|
Mobile device connection |
2.4 GHz direct link for inter-device communication and BLE for pairing / mobile phone connection |
|
|
App. compatibility |
iOS 11.0 or later & Android 5.0 or later |
|
|
Materials |
CNC machined aluminum and stainless steel components. |
|
Watch wideo
Watch wideo